tutorial RSS

550 cord, 550 paracord, diy, how to, parachute cord, paracord, paracord projects, survivorcord, tiat, titan, titan paracord, tutorial -

Discover how to tie the dragon egg paracord pouch in this instructional video presented by Tying It All Together (TIAT). The design of the dragon egg paracord pouch results in a sturdy and functional paracord pouch. To tie the dragon egg paracord pouch you will need three 12’ lengths of SurvivorCord or WarriorCord, a pair of scissors, and a lighter. For this video tan, blue, and orange paracord is going to be used. This piece begins with the pouch base. Begin by line the center of the cords horizontally with the blue on top, orange in the middle, tan on the bottom. Take...

Read more

550 cord, 550 paracord, diy, how to, parachute cord, paracord, paracord projects, survivorcord, tiat, titan, titan paracord, tutorial, warriorcord -

Learn how to make the jagged cacophony bar paracord bracelet in this how-to video presented by Tying It All Together. With its offset, three tiered, bilateral symmetry the jagged cacophony bar paracord bracelet makes a unique bracelet that will stand out. To make the jagged cacophony bar paracord bracelet you will need three 5’ lengths of each white, blue, and maroon paracord. You will also need a pair of scissors and a lighter. This will make a bracelet that is about 7 ½”. This bracelet will begin with an overhand knot loop base. Begin by arranging the cords so the...

Read more

550 cord, 550 paracord, diy, how to, parachute cord, paracord, paracord knots, paracord projects, survivorcord, tiat, titan, titan paracord, tutorial, warriorcord -

In this tutorial presented by Tying It All Together (TIAT), you will discover how to make a Pupa Pull Tie from TITAN SurvivorCord or WarriorCord. The Pupa Pull Tie is a fundamental technique that can be used to make elaborate ties that expand cylindrically in 3 dimensions. To make a pupa paracord pull tie you will need one 5’ section of paracord, scissors, and a lighter. To begin, find the center of the cord and create a loop that is the desired length of pull tie. With the working cords on top cross them at the bottom of the loop so that the...

Read more

550 cord, 550 paracord, diy, how to, parachute cord, paracord, paracord projects, survivorcord, titan, titan paracord, tutorial, warriorcord -

In this tutorial presented by Tying It All Together (TIAT), you will discover how to make a divided sine wave sinnet paracord key fob. The divided sine wave sinnet paracord key fob displays a subtle, springy, color segmented wave of colors that is interesting and eye-catching. To make a divided sine wave sinnet paracord key fob you will need three 4’ lengths of paracord. For this particular piece we are going to use green, brown, and blue SurvivorCord or WarriorCord.. The divided sine wave sinnet paracord key fob begins with a doubled endless falls base. Beginning with the brown and blue cords, place...

Read more

550 cord, 550 paracord, diy, how to, parachute cord, paracord, paracord projects, survivorcord, titan, titan paracord, tutorial, warriorcord -

In this tutorial presented by Tying It All Together (TIAT), we discover how to make the Azulejo Endless Falls Paracord Key Fob. This 6” azulejo endless falls paracord key fob takes on the distinctive look of Portuguese and Spanish painted ceramic tile work, and can be made with either SurvivorCord or WarriorCord. To make the azulejo endless falls paracord key fob you will need three 4’ lengths of paracord of three different colors. For this particular bracelet we will be using red, olive green, and bright green. You will also need a lighter. Begin by taking the red and bright green cords together...

Read more

550 cord, 550 paracord, bracelet, diy, how to, parachute cord, paracord, paracord projects, survivorcord, tiat, titan, titan paracord, tutorial -

Discover how to make the bound tower paracord bracelet in this informative how-to video present by Tying It All together (TIAT). The bound tower paracord bar bracelet evokes the look of a splendor tower, bound by chains within, and can be made with either SurvivorCord or WarriorCord. To make the bound tower paracord bar bracelet you will need one 4’ length of paracord and one 6’ length of paracord. The colors are your choice, but in this project we are going to use 4’ orange paracord and 6’ yellow paracord. These dimensions will yield a 7 ½” long bracelet. Find the center of...

Read more

550 cord, 550 paracord, diy, how to, parachute cord, paracord, paracord knots, paracord projects, rope knots, survival cord, survivorcord, titan, titan paracord, tutorial -

Discover how to make a Paracord Deployment Lanyard in this instructional video presented by ITS Tactical. This fast deploy allows you to carry or store up to 25’ of TITAN SurvivorCord or WarriorCord in a single lanyard. For this paracord fast deploy, you will need a 25’ section of paracord and a lighter. Start by taking about 8” of one of the paracord ends and bending it down. You want this part that is folded over to fit in your closed fist and a loop that is about 1” coming out of the top of your hand. This loop is where you can hang the lanyard...

Read more

550 cord, 550 paracord, 550cord, bracelet, diy, how to, parachute cord, paracord, paracord projects, survival, survival cord, survivorcord, titan, titan paracord, tutorial, warriorcord -

In this video tutorial presented by Intense Anglers, we learn how to make a paracord fishing and survival bracelet. Here's how to never be caught again without a resource to catch a meal. The paracord fishing and survival bracelet is a great way to incorporate actual fishing tackle into the bracelet, without affecting the look, feel, or integrity of the survival bracelet itself. To make the fishing and survival bracelet you will need: Approximately 8’ of TITAN SurvivorCord or WarriorCord 10lb braided fishing line 3 split shots 2 size 10-12 fishing hooks Plastic release clip buckle A binder clip or paper clip Super glue...

Read more

550 cord, 550 paracord, bracelet, diy, how to, parachute cord, paracord, paracord projects, survival, survival cord, survivorcord, titan, titan paracord, tutorial, warriorcord -

Learn how to make a paracord quick deploy bracelet with the blaze bar in this instructional how-to video. This unique paracord quick deploy bracelet is the ultimate survival bracelet that allows nearly instant access to the entire length of cordage contained within the bracelet. To make a paracord quick deploy bracelet you will need a 3/16” bow anchor shackle, at least 14” of TITAN SurvivorCord and WarriorCord, and a lighter. To begin making the paracord quick deploy bracelet, start by attaching the paracord to the bow anchor shackle via a cow hitch. To attach the paracord through a cow hitch, fold the...

Read more

550 cord, 550 paracord, bracelet, diy, how to, parachute cord, paracord, paracord projects, survivorcord, titan, titan paracord, tutorial -

Learn how to make a Kronos bar paracord bracelet in this tutorial presented by Paracord 101. The Kronos bar paracord bracelet is a simple technique that can be personalized through the use of many different colors of TITAN SurvivorCord and WarriorCord. To make the kronos bar paracord bracelet you will need: Three 1 ½’ sections of paracord. For this particular bracelet we will be using black, grey, and orange paracord. A plastic buckle A lighter To begin take the orange and grey cords, fold them in half, and attach them to one of the buckle ends via a cow hitch. To make...

Read more

550 cord, 550 paracord, bracelet, diy, how to, parachute cord, paracord, paracord projects, survival, survivorcord, titan, titan paracord, tutorial, warriorcord -

In this video by BoardParacord! you will learn how to make the serpent river bar survival bracelet, with TITAN SurvivorCord or WarriorCord.  The serpent river bar survival bracelet is a unique design that is guaranteed to be complimented. To make the serpent river bar survival bracelet you will need one 6 ½’ length of red paracord one 6 ½’ of black paracord fused together at one end, and ½” plastic buckle. To begin, fold the length of paracord in half at the point where the paracord is fused together. Take the free ends together side-by-side and put them through one end of...

Read more

550 cord, 550 paracord, diy, how to, parachute cord, paracord, paracord knots, survival, survival cord, survivorcord, swing, TITAN, titan paracord, tree, tutorial, warriorcord -

Learn how to make an old-fashioned tree swing using paracord through this instructional video provide by Lowes. Why buy a tree swing when you can make an old-fashioned tree swing using paracord within an hour? You will need a 1x8 hardwood board at least 44” in length, SurvivorCord or WarriorCord (length will vary with the height of the tree branch), carpenters glue, masking tape, a lighter, sandpaper, and a variety of common hand tools. Start by cutting the hardwood board into equal lengths of 22”. Apply the carpenters glue to one side of each of the boards. Spread the glue evenly with a putty...

Read more

550 cord, 550 paracord, 550cord, diy, handle, how to, paddle, parachute cord, paracord, paracord projects, survival, survival cord, survivorcord, TITAN, titan paracord, turks head, tutorial, warriorcord, wrap -

Learn how to wrap a paddle with paracord in this instructional video presented by ITS Tactical. Why have plain old paddles when you can wrap the handles with paracord? This video will teach you how to wrap a paddle handle with paracord using spiral hitching and two Turks heads. You will need one 14’ section and two 4’ sections of SurvivorCord or WarriorCord, a small paddle, scissors, a lighter, and a marlins spike.  The 14’ section of paracord will be used for the spiral hitching and the 4’ sections will be used to make the Turks head for each end of the...

Read more

550 cord, 550 paracord, bracelet, diy, how to, parachute cord, paracord, paracord projects, survivorcord, titan, titan paracord, tutorial, warriorcord -

In this tutorial by Paracord 101, we discover how to make a Cascading Ladders Bar Paracord Bracelet.  The Cascading Ladders Bar Paracord Bracelet is a unique design that can double as a survival bracelet. To make a cascading ladders bar paracord bracelet you will need a lighter, a plastic buckle, two 7’ lengths of different colored SurvivorCord or WarriorCord joined together at one end, and one 4’ section of black paracord with an extra 2” for comfort.  We will be using orange and green paracord for 7’ sections of paracord that are fused together. To begin place the buckles the appropriate distance apart...

Read more

550 cord, diy, hitch, parachute cord, paracord, ringbolt, tiat, tutorial, viceroy -

Discover how to tie a Ringbolt Hitch Viceroy in this instructional video presented by Tying It All together (TIAT). The Ringbolt Hitch Viceroy is a new type of Fusion Knot that looks like a historical knot, giving it a unique and intriguing look. To tie a Ringbolt Hitch Viceroy you will need 6’ of SurvivorCord or WarriorCord, and a lighter. Begin by making the base by creating a loop that is about 4” long. Take the long working end of paracord and wrap it around the base of the loop. Insert the working end below the newly created loop, but above the base of...

Read more

Tags